Boat trailer movements require the full rig dimensions
When someone says “six-metre boat”, the transport length may be longer once the trailer drawbar, motor overhang and accessories are included. Weight can also vary with fuel, batteries, outboard and stored equipment. The operator needs the combined boat and trailer mass and overall dimensions, not an approximate hull length alone.
This is for suitable boats on appropriate trailers or specifically assessed equipment arrangements. It is not a promise to crane-load boats without trailers, retrieve submerged craft or transport oversize marine loads.
Is the trailer safe to roll?
A trailer with failed bearings, a damaged wheel, seized brakes or unroadworthy tyres may need a different transport approach. Describe the problem before asking for a quote. Simply attaching a damaged trailer to another tow vehicle can create unnecessary risk. If the trailer must be carried on the truck, capacity and loading geometry must be checked.
Getting pickup ready at a marina or storage site
Boat yards and marina storage facilities can have controlled gates, tall boats, uneven ground and restricted collection times. Confirm who can release the trailer and where the operator can safely access it. If the rig is parked behind other boats, arrange for the facility to make it available rather than assuming a truck can manoeuvre inside a crowded storage row.
Complete boat and trailer details
- Boat type and length, trailer make/axles and loaded combined weight.
- Overall height including canopy, bimini, antennas or any fixed equipment.
- Total width and length including drawbar and motor overhang.
- Wheel, bearing, coupling, winch and trailer condition.
- Pickup and delivery sites, release contacts and any site rules.
Secure for the road before movement
The owner or responsible party should check that the boat is correctly supported and secured on the trailer, with loose gear and covers safe for transport. If the craft is poorly seated or the trailer is defective, notify us before collection; the job may require repair or different specialist handling.
A quote for the actual boat setup
Route distance, combined load, access, equipment availability and trailer condition determine whether and how the move can be made. We can assess a suitable boat trailer transfer, but we do not quote a universal rate based solely on the boat's nominal length. A large or unusually heavy rig may need a marine transport specialist.
Overhang and high accessories can matter more than the hull length
The outboard motor, bow pulpit, drawbar, canopy, rod holders and aerials can all extend outside the nominal boat length and height. Supply the whole road-travel configuration. If the rig is too wide, high, long or heavy for the available truck, a specialist marine carrier may be required. The operator should not assume a boat is suitable based on a casual description such as “small runabout.”
Yard pickups need a clear release plan
Marinas and boatyards may move rigs around their premises and have particular access rules. Confirm that the trailer will be positioned where an authorised transport vehicle can safely collect it. If the trailer's tyres or bearings have deteriorated in storage, do not assume it can be pulled out normally. Describe any damage in advance so the proposed method can be assessed.
At delivery, check that the destination has a level area for the whole rig and permission to store it. A narrow residential driveway may not accept a long boat-and-trailer combination even when a standard car fits.
A final job-specific check
For a boat stored under a canopy, measure the highest fixed accessory and the available clearance at the exit. A rig may fit into its present shed yet be too tall for the desired access route when placed on transport equipment.

